Mastercam® Training

San Diego CAD/CAM, Inc. Training Brochure
Training Registration Form

Mastercam Training

Our training sessions are for 3 or 4-hour slots of time. Scheduling is by first-come, first-served basis. We prefer training at our facility in Sabre Springs. Any of the classes listed below can be done as a "closed course" for an individual or company at a higher rate. (See personalized training below) We sometimes encourage the use of part files from your company for training- at the instructors' discretion.

Registration

To register for training, download, print, complete and mail or fax the Registration Form to our office (Fax: 858.602.1179 or email: julied@sandiegocadcam.com). Our classroom is limited to seven students per session. Classes are filled on a first-come, first-served basis. A Company Purchase Order or $300 deposit is required to hold a seat in class. If you cannot attend after registering, please give as much notice as possible so we may offer other customers a chance to attend. Deposits are non-refundable within 2 weeks of class start date.

Class Size

Classes will not be held unless a minimum of four (4) students have enrolled. (Accepted exceptions are if company or individual purchases a "closed course" at a higher rate).

2D and 3D Night Training

The cost for our 45 hour Mastercam 2D Training Course or Mastercam 3D Training Course is $1,500 per course. These classes typically are on Tuesday and Thursday evenings from 5:00 pm to 8:00 pm. A Registration Form, purchase order number and/or a $300 deposit is required to confirm enrollment. Full payment must be made before class begins unless otherwise agreed with the accounting office. (Lathe is not included in either of these classes.)

Mastercam X Transition / Quick Start

This 12-hour course is a great starting point for the new user or for transitioning from an earlier version to the X series of software. Held in three 4-hour sessions. $425 per person. Discounts apply for multiple students (3+) in same class.

Lathe, Surface Machining, 5-Axis

Lathe - 8 hours @ $425 per person, Surface Machining - 12 hours @ $550 per person, 5-Axis - 12 hours @ $675 per person

Personalized Training

We offer personalized training to our Mastercam customers at $350 per person, per 4-hour day, or $750 per day for groups of 3 or more from the same company. This training is done in our classroom as a “closed course”.

On-site Training

On-site training, at your location in the U.S.only, may be available at a cost of $750 for a 6-hour training day. On-site training, at your location in Mexico, is not available at this time. Personalized training must be scheduled at least a month in advance. Company part files are appreciated.

For More Information

For more information about our classes or training options, please contact Julie Davis at julied@sandiegocadcam.com, or 858.748.9692.